DG9BFC large avatar

DG9BFC

DG9BFCis number38member,register2016-02-24 04:01

Signature:

Homepage:

Location:

DG9BFC The theme of the recently created

    DG9BFC reply recently

    • Reply: DG9BFC The theme of creating defective 901 S ???

      @KinnieDhar

      i am only using original charger ... and that charger is working fine (also use it somtimes for powering other things with 12v dc and charger is still good) 32 days ago
    • Reply: Andy The theme of creating Meaning of value in top right corner

      yes altimeter ... and yes it can be calibratet
      if i set mine to actual height on ground ... and lift it up to ceiling the difference is about 2 m (so it is sensitive and accurate)
      reason is ... if you climb a tower you know how long a rope is needed to pull up tools :-)
      (and you can calculate the time and speed if you fall down hi hi)
      allways stay safe with 2 safety lines ... same for the analyzer
      do not count on shoulder strap alone when on a tower and add another rope to analyzer! ... and secure it to a tower leg (no ... a cable tie is not safe!!)
      (i would do it if i had to climb a tower and work there on antennas etc.) 32 days ago
    • Reply: EA1DDO The theme of creating Rubber protection

      these are picture from my very old (but still working!!) 901H ... but i added the same rubber pads on the back and the side pads to the 901s also (had to make some cut outs with a sharpie for the power connector and the smart card reader) 32 days ago
    • Reply: EA1DDO The theme of creating Rubber protection

      i
      have added some anti slip pads at the backside and some rubber srips on the side
      that protects almost as the complete closed silicone thingy ... does not slip on the table anymore and has a nice feeling in the hand now
      32 days ago
    • Reply: EA1DDO The theme of creating Rubber protection

      32 days ago

    Deepace-BBS